Dencoat - Tomorrow's Floors Today

Systems

Denpox Topfloor

(2-4 mm)

A two pack, solvent free epoxy resin based flooring material. Denpox Topfloor 2-4 mm is being used for dry industrial areas, which are subject to normal wear. The floor has a high wear resistance, chock-proof resistance and chemical resistance. At the same time the floor is easy to maintain, and it can be used for storehouses, laboratories, schools, hospitals and other light industries.

Benefits

Seamless and Hygienic Finish
Very Good Chemical Resistance
Fast Installation
Low Maintenance Cost
Solvent Free; Low Odour
Attractive Appearance
Easy to Clean & Sterilize
High Impact & Abrasion Resistance

Applications

Denpox Topfloor floorings offers excellent wearability, impact and chemical resistance. Denpox Topfloor is easy to clean and maintain in a hygienic condition. Typical areas of use are workshops, warehouses, exhibition areas, laboratories, canteens, bathroom facilities, offices and corridors.

Scope of use

Manufacturing
Packaging
Warehouses

Application conditions

Temperature 10ºC to 30ºC, best 15 to 20ºC, max. moisture content in the concrete subfloor 5% by weight.

Appearance

Denpox Topfloor is a smooth floor with a glossy finish.

Temperature Resistance

Denpox Topfloor is resistant to temperature cycles up to 70°C. Extended periods at these temperatures and above will make material susceptible to chemical attack and abrasion wear

Life Expectancy

10 - 15 years.

Colours

See separate color chart.

System Build-up

LAYER	PRODUCT	CONSUMPTION (kg/m²)	INTERMEDIATE	THICKNESS (mm)	APPLICATION
Primer	Denpox Primer	0.3 - 0.5	sand scatter (optional)	Min 0.3	Rubber squegee and paint roller
Wear layer	Denpox CBR	2.5 - 4.0	None	Min 2.0	Notched rubber squegee and spike roller

Technical Data

Properties

Value

Fully cured at 20°C

7 days

Applied thickness

2,0 - 4.0 mm

Water Permeability

Nil – Karsten test (impermeable)

Hardness

SHORE D 80

Compressive strength

40 MPa

Reaction to fire

Bfl-s1

Bond strength

>1.5 MPa

Temperature resistance

Up to 70°C at 4 mm

Thermal expansion coefficient

< 38 ppm

Abrasion resistance

50 mg / 1000 cycles (Taber Abrader)

Thermal conductivity

< 0,4 W/m·K

Anti-slip according to DIN 51130

R9 – R13

Food Contact

No contamination

Colours

Yellow

Buff

Red

Sky Blue

Light Green

Light Grey

Mid Grey

Black