Dencoat - Tomorrow's Floors Today

Systems

Denspartic Topfloor

(2-4 mm)

Polyaspartic based flooring system.
Denspartic Topfloor with a smooth structure is ideal for areas, which are subject to heavy mechanical and chemical wear, with high demands for being free of dust, such as work rooms, storage rooms, laboratories, etc. Denspartic Topfloor is also suitable for renovation of older Denspartic floorings.

Benefits

Aesthetically Pleasing, Silkmat Surface
Very Good Chemical Resistance
Fast Installation
Low Maintenance Cost
Non Slip Finish if required
UV Resistant
Easy to Clean & Sterilize

Applications

Denspartic Topfloor floorings are flexible with excellent wearability, impact and chemical resistance. Denspartic Topfloor is easy to clean and maintain in a hygienic condition. Typical areas of use are workshops, warehouses, exhibition areas, laboratories, canteens, bathroom facilities, offices and corridors. Denspartic Topfloor is used also to refresh or renovate old polyaspartic floors. The very fast curing of Denspartic floorings means, that an eventual production stop is minimized while installing the floor.

Scope of use

Work rooms
Storage rooms
Laboratories

Application conditions

Temperature 5ºC to 30ºC, best 15 to 25ºC, max. moisture content in the concrete subfloor 5% by weight.

Appearance

Denspartic Topfloor is a smooth floor with a silkmatt finish and is available in 4 versions: - Pigmented, for selection see Colour - Design look, see Colour Design - Mottled, see Colour Décor - Logo, individual company logo design

Temperature Resistance

Denspartic Topfloor is resistant to temperature cycles up to 80ºC. Extended periods at these temperatures and above will make material susceptible to chemical attack and abrasion wear.

Life Expectancy

10 - 15 years.

Colours

See separate color chart.

System Build-up

LAYER	PRODUCT	CONSUMPTION (kg/m²)	INTERMEDIATE	THICKNESS (mm)	APPLICATION
Primer	Denspartic AP	0.3 - 0.5	sand scatter 0.3 - 0.8 or 0.7 - 1.2 for antislip properties	Min 0.3	Rubber squegee and paint roller
Top coat	Denspartic ACS	2.5 - 3.0	None	2.0 - 4.0	Notched rubber squegee and spike roller

Technical Data

Properties

Value

Abrasion resistance

50 mg / 1000 cycles (Taber Abrader)

Anti-slip according to DIN 51130

R9 – R13

Applied thickness

2,0 - 4.0 mm

Bond strength

>1.5 MPa

Compressive strength

40 MPa

Food Contact

No contamination

Fully cured at 20°C

2 hours

Hardness

SHORE D 40

Reaction to fire

Bfl-s1

Temperature resistance

Up to 80°C

Thermal conductivity

< 0,4 W/m·K

Thermal expansion coefficient

<40 ppm

Water Permeability

Nil – Karsten test (impermeable)

Colours