Dencoat - Tomorrow's Floors Today

Systems

Dencryl Industry

(4-6 mm)

PMMA based flooring system.
Recommended for industrial areas, which are subject to very high mechanical or chemical wear with high hygienic demands, such as heavy industry, industrial kitchens, bakeries, slaughter houses, food industry, refrigerator areas, and other areas, where an anti-slip surface and easily cleanable floor is required.

Benefits

Aesthetically Pleasing, Silkmat Surface
Very Good Chemical Resistance
Weatherproof & UV Resistant
Fast Installation
Curing Down to -30°C
Low Maintenance Cost
Non Slip Finish if required
Easy to Clean & Sterilize

Applications

For all types of medium to heavy load industrial floors, in combination with high demands to hygiene and cleanability. Dencryl Industry floorings are flexible with a high wearability, impact and chemical resistance. Dencryl Industry is easy to clean and maintain in a hygienic condition. The very fast curing of Dencryl floorings means, that eventual production stop is minimized while installing the floor.

Scope of use

Heavy industry
Industrial kitchens
Food industry

Application conditions

Temperature -30ºC to 30ºC, best 15°C to 25ºC, max. moisture content in the concrete subfloor 5% by weight.

Appearance

Dencryl Industry is a smooth or antislip multicoloured floor with a silkmatt finish.

Temperature Resistance

Dencryl Industry is resistant to temperature cycles up to 80°C. Extended periods at these temperatures and above will make material susceptible to chemical attack and abrasion wear.

Life Expectancy

10 - 20 years.

Colours

See separate color chart.

System Build-up

LAYER	PRODUCT	CONSUMPTION (kg/m²)	INTERMEDIATE	THICKNESS (mm)	APPLICATION
Primer	Dencryl P11	0.3 - 0.5	Scatter Quartz 0.7 - 1.2 mm on wet surface	Min 0.3	Rubber squegee and paintroller
Wear layer	Dencryl B24 + Color Quartz	2.5 + 8.0	Scatter Color Quartz on wet surface for anti slip purpuse	4.0 - 6.0	Notched metal squegee and trowel
Topcoat	Dencryl S32	0,7 - 1.2	None	0.7 - 1.2	Rubber squegee and paint roller

Technical Data

Properties

Value

Fully cured at 20°C

2 hours

Applied thickness

4 - 6 mm

Water Permeability

Nil – Karsten test (impermeable)

Hardness

SHORE D 80

Compressive strength

85 MPa

Reaction to fire

Dfl-s1

Temperature resistance

Up to 80°C at 6 mm

Thermal expansion coefficient

<40 ppm

Abrasion resistance

50 mg / 1000 cycles (Taber Abrader)

Anti-slip according to DIN 51130

R9 – R13

Food Contact

No contamination

Colours