Dencoat - Tomorrow's Floors Today

Systems

Dencoat DPM

(0.5 - 1.0 mm)

Dencoat DPM is a solvent free, low viscocity, 3-component damp proofing membrane and water barrier. It is used on concrete walls and other cementisious substrates to stop penetrading moisture and humidity. Dencoat DPM is very easy to install, offers extremely good bonding properties and is recommended for use on any concrete substrate with up till 100% releative humidity.

Benefits

Very Good Chemical Resistance
Low Maintenance Cost
Damp Proof Membrane Layer
No VOC & Solvent Free
Low Installation Cost
Adhesion to all horizontal and vertical surfaces
Resistant to backwater moisture penetration
Green technology based on renewable raw materials
Low cost water proofing membrane
Extreme bonding properties
Resist 7 bar water pressure

Applications

Dencoat DPM is a water and moisture barrier used on wet and humid walls, effectively preventing moisture from penetrading. Due to its excellent bonding properties, Dencoat DPM will resist more than 7 bar of waterpressure, ensuring dry walls and a comfortable indoor climate. Dencoat DPM can easely be recoating with standard wall paint, plaster and tiles.

Application conditions

Temperature 10ºC to 30ºC, best 15 to 25ºC, max. moisture content in the concrete subfloor 5% by weight.

Appearance

Dencoat DPM is a greyish waterproofing membrane

Temperature Resistance

Dencoat DPM is resistant to temperature cycles up to 90ºC dry heat and 80ºC. wet heat. Extended periods at these temperatures and above will make material susceptible to chemical attack and abrasion wear.

Life Expectancy

more than 30 years

Colours

See separate color chart.

System Build-up

LAYER	PRODUCT	CONSUMPTION (kg/m²)	INTERMEDIATE	THICKNESS (mm)	APPLICATION
Membrane	Dencoat DPM	0.4 - 0.5	None	approx 0.5	Paint brush and roller

Technical Data

Properties

Value

Fire class EN 13501-1

Bfl-s1

Fully cured at 20°C

3 days

Applied thickness

0,5 - 1 mm

Water Permeability

Nil – Karsten test (impermeable)

Compressive strength

60 MPa

Bond strength

>1.5 MPa

Temperature resistance

Up to 80°C

Resistance to hydrostatic pressure ASTM D5385 - 2000

7 bar for 1 hour. No leakage