Dencoat - Tomorrow's Floors Today

Systems

Denpox Topcoat

(0.5 - 1.0 mm )

A two pack, solvent free epoxy resin based flooring material. Denpox Topcoat is ideal to provide a light to medium duty, easy to clean, chemical resistant floor coating. A non slip finish can be produced by incorporation of aggregates between coats. Typical uses are process, manufacturing, packaging and warehousing areas subjected to heavy foot and pallet truck traffic.

Benefits

Seamless and Hygienic Finish
Very Good Chemical Resistance
Fast Installation
Low Maintenance Cost
Non Slip Finish if required
High Abrasion Resistance
Solvent Free; Low Odour
Attractive Appearance
Easy to Clean & Sterilize
High Build, upto 0.25 mm each coat

Applications

To provide a light to medium duty, easy to clean, chemical resistant flooring. Typical uses are dry areas as packaging and warehousing areas subjected to heavy foot and pallet truck traffic

Scope of use

Manufacturing
Packaging
Warehouses

Application conditions

Temperature 10ºC to 30ºC, best 15 to 25ºC, max. moisture content in the concrete subfloor 5% by weight.

Appearance

Denpox Topcoat provides a smooth finish with a glossy surface.

Temperature Resistance

Temperature 10ºC to 30ºC, best 15 to 25ºC, max. moisture content in the concrete subfloor 5% by weight.

Life Expectancy

3 - 5 years.

Colours

See separate color chart.

System Build-up

LAYER	PRODUCT	CONSUMPTION (kg/m²)	INTERMEDIATE	THICKNESS (mm)	APPLICATION
Primer	Denpox Primer	0.3 - 0.5	sand scatter (optional)	Min 0.3	Rubber squegee and paint roller
Top coat	Denpox CTC	0.5 - 1.0	None	Min 0.5	Rubber squegee and paint roller

Technical Data

Properties

Value

Fully cured at 20°C

7 days

Applied thickness

0,5 - 1.0 mm

Water Permeability

Nil – Karsten test (impermeable)

Hardness

SHORE D 40

Compressive strength

as the substrate

Reaction to fire

Bfl-s1

Bond strength

>1.5 MPa

Temperature resistance

Up to 70°C

Thermal expansion coefficient

< 38 ppm

Abrasion resistance

50 mg / 1000 cycles (Taber Abrader)

Thermal conductivity

< 1.5 W/m·K

Anti-slip according to DIN 51130

R9 – R13

Food Contact

No contamination

Colours

Yellow

Buff

Red

Sky Blue

Light Green

Light Grey

Mid Grey

Black