Dencoat - Tomorrow's Floors Today

Systems

Denpox Terrazzo

(6-15 mm)

A three pack, solvent free epoxy resin based flooring system. Denpox Terrazzo ideal for areas, where massive decorative surfaces are wanted. The floor is very easy to maintain and easily cleanable and makes the environments look very presentable. The floor is typically installed in for instance airport terminals, supermarkets, exhibition rooms, show rooms, etc.

Benefits

Seamless and Hygienic Finish
Fast Installation
Low Maintenance Cost
High Abrasion Resistance
High Impact Resistance
Solvent Free; Low Odour
Attractive Appearance
Good Chemical Resistance
Easy to Clean & Sterilize

Applications

Decorative and wear resistant terrazzo floors for airport terminals, railway stations, supermarkets, exhibitions areas etc. All kind of decorative effects are possible by varying the background colour and the stonemix.

Scope of use

Airports
Supermarkets
exhibitions
Show rooms

Application conditions

Temperature 10ºC to 30ºC, best 15 to 25ºC, max. moisture content in the concrete subfloor 5% by weight.

Appearance

Denpox Terrazzo is a decorative floor build up with coloured epoxy and natural stones which may be varied as required.

Temperature Resistance

Denpox Terrazzo is resistant to temperature cycles up to 70°C. Extended periods at these temperatures and above will make the material susceptible to chemical attack and abrasion wear.

Life Expectancy

More than 20 years.

Colours

See separate color chart.

System Build-up

LAYER	PRODUCT	CONSUMPTION (kg/m²)	INTERMEDIATE	THICKNESS (mm)	APPLICATION
Primer	Denpox Primer	0.3 - 0.5	sand scatter (optional)	Min 0.3	Rubber squegee and paint roller
Wear layer	Denpox CBR + aggregate	3.0 - 6.0 + aggregate	Powerfloat to compact	6.0 - 15.0 depending on aggregate	Notched rubber squegee
Mat coat	Denspartic MC	0.1 - 0.2	None	0.1 - 0.2	Paint roller

Technical Data

Properties

Value

Fully cured at 20°C

7 days

Applied thickness

6 - 15 mm

Water Permeability

Nil – Karsten test (impermeable)

Hardness

SHORE D 90

Compressive strength

85 MPa

Reaction to fire

Bfl-s1

Bond strength

>1.5 MPa

Temperature resistance

Up to 90°C at 15 mm

Thermal expansion coefficient

< 38 ppm

Abrasion resistance

50 mg / 1000 cycles (Taber Abrader)

Thermal conductivity

< 0,6 W/m·K

Anti-slip according to DIN 51130

R9 – R13

Food Contact

No contamination

Colours