Dencoat - Tomorrow's Floors Today

Systems

Denpox Aqua

(0.5- 1.0 mm)

A two pack, solvent free waterbased epoxy flooring material.
Denpox Aqua 0.5-1.0 mm is diffusion open and therefore it can be applied on new-poured concrete floors disregarding the content of moisture in the concrete. Denpox Aqua can also be used in areas, where you want to secure pressure equalization from steam outlet, for instance in basements or on magnesite bounded floors.

Benefits

Seamless and Hygienic Finish
Very Good Chemical Resistance
Low Maintenance Cost
High Abrasion Resistance
Solvent Free; Low Odour
Attractive Appearance
Easy to Clean & Sterilize
Water Based High Impact Resistance

Applications

Denpox Aqua floorings offers excellent wearability, impact and chemical resistance. Denpox Aqua is easy to clean and maintain in a hygienic condition. Typical areas of use are basements and wet subfloorings where pressure equalisation from the influence of vapour, for example in cellars and magnesitebonded floors, must be ensured.

Scope of use

Basements
on magnesite floors

Application conditions

Temperature 5ºC to 30ºC, best 15 to 20ºC, max. moisture content in the concrete subfloor 5% by weight.

Appearance

Denpox Aqua is a smooth floor with a mat finish.

Temperature Resistance

Denpox Aqua is resistant to temperature cycles up to 70°C. Extended periods at these temperatures and above will make material susceptible to chemical attack and abrasion wear.

Life Expectancy

3 - 5 years.

Colours

See separate color chart.

System Build-up

LAYER	PRODUCT	CONSUMPTION (kg/m²)	INTERMEDIATE	THICKNESS (mm)	APPLICATION
Primer	Denpox Aqua Primer	0.3 - 0.5	sand scatter (optional)	Min 0.3	Rubber squegee and paint roller
Top coat	Denpox Aqua	0.5 - 1.0	sand scatter (optional)	Min 0.3	Rubber squegee and paint roller

Technical Data

Properties

Value

Fully cured at 20°C

7 days

Applied thickness

0,5 - 1 mm

Water Permeability

Diffusion open

Hardness

SHORE D 40

Compressive strength

40 MPa

Reaction to fire

Bfl-s1

Bond strength

>1.5 MPa

Temperature resistance

Up to 70°C

Thermal expansion coefficient

< 38 ppm

Abrasion resistance

50 mg / 1000 cycles (Taber Abrader)

Thermal conductivity

< 0,6 W/m·K

Anti-slip according to DIN 51130

R9 – R13

Food Contact

No contamination

Colours

Yellow

Buff

Red

Sky Blue

Light Green

Light Grey

Mid Grey

Black