Dencoat - Tomorrow's Floors Today

Systems

Dencrete MD

(3-5 mm)

Dencrete MD is a is a self levelling cementitious polyurethane floor based on natural bio-polyol without solvents or any VOC. It provides excellent resistance to aggressive chemicals and high abrasion resistance. It is dense and impervious and suitable for dry and semi-wet areas where cleanliness, a joint free finish and a robust long-lived floor is required.

Benefits

Low Maintenance Cost
Excellent Chemical Resistance
Clean & Hygienic
High Abrasion Resistance
No VOC & Pthalate Free
Anti Slip Finish Available
Temperature Resistant
Seamless & Clean Look
Low Odour during Installation

Applications

To provide a medium to heavy duty floor finish with high temperature and chemical resistance. Typical uses are dry process areas with heavy traffic and impact and chemical exposure.

Scope of use

Industrial kitchens
Bakeries
Dairies
Breweries
slaughter houses

Application conditions

Temperature 10ºC to 30ºC., best 15 to 25ºC, max. moisture content in the concrete subfloor 5% by weight.

Temperature Resistance

Dencrete MD is resistant to temperature cycles up to 90ºC dry heat and 80ºC. wet heat. Extended periods at these temperatures and above will make material susceptible to chemical attack and abrasion wear.

Life Expectancy

10 - 20 years.

Colours

See separate color chart.

System Build-up

LAYER	PRODUCT	CONSUMPTION (kg/m²)	INTERMEDIATE	THICKNESS (mm)	APPLICATION
Primer	Dencrete Primer	0.3 - 0.5	Light sand scatter 0.3 - 0.8mm on wet surface	Min 0.3	Rubber squegee and paint roller
Top Layer	Dencrete MD	6.0 - 10.0	None	3.0 - 5.0	Notched rubber squegee and spike roller

Technical Data

Properties

Value

Fire class EN 13501-1

Bfl-s1

Fully cured at 20°C

7 days

Applied thickness

3 - 5 mm

Water Permeability

Nil – Karsten test (impermeable)

Hardness

SHORE D 90

Compressive strength

55 N/mm2

Reaction to fire

Bfl-s1

Bond strength

>1.5 MPa

Temperature resistance

Up to 90°C at 4 mm

Thermal expansion coefficient

< 38 ppm

Abrasion resistance

20 mg / 1000 cycles (Taber Abrader)

Thermal conductivity

< 1.5 W/m·K

Anti-slip according to DIN 51130

R9 – R13

Food Contact

No contamination

VOC according to EN 13419

Pass

Chemical resistance

See Dencrete resistance list

Flexural strenght

22 N/mm2

Tensile strenght

19 N/mm2

Colours

Yellow

Buff

Red

Sky Blue

Light Green

Light Grey

Mid Grey

Black