Dencoat - Tomorrow's Floors Today

Systems

Denpox Industry

(4-6 mm)

A three pack, solvent free epoxy resin based flooring system. Denpox Industry is ideal for areas, with high hygienic demands. It is recommended for industrial environments, which are subject to heavy mechanical and chemical wear. The floor is very easy to clean and maintain and is therefore very suitable in food processing facilities.

Benefits

Very Good Chemical Resistance
Low Maintenance Cost
Non Slip Finish if required
High Abrasion Resistance
High Impact Resistance
Solvent Free; Low Odour
Attractive Appearance
Easy to Clean & Sterilize

Applications

To provide a medium to heavy duty, easy to clean, chemical resistant flooring. The non slip finish can be adjusted to clients need. Typical uses are process, manufacturing, packaging and warehousing areas subjected to heavy wear and pallet truck traffic.

Scope of use

Food industry
Breweries
slaughter houses
Chemical plant processing

Application conditions

Temperature 10ºC to 30ºC, best 15 to 25ºC, max. moisture content in the concrete subfloor 5% by weight.

Appearance

Denpox Industry is a coloured floor which can be produced with a non slip finish as required.

Temperature Resistance

Denpur Industry is resistant to temperature cycles up to 70°C. Extended periods at these temperatures and above will make material susceptible to chemical attack and abrasion wear.

Life Expectancy

10 - 20 years.

Colours

See separate color chart.

System Build-up

LAYER	PRODUCT	CONSUMPTION (kg/m²)	INTERMEDIATE	THICKNESS (mm)	APPLICATION
Primer	Denpox Primer	0.3 - 0.5	sand scatter (optional)	Min 0.3	Rubber squegee and paint roller
Wear layer	Denpox CBR + Quartz	2.0 + Quartz	full broadcast Quartz	3.0 - 4.0	Notched rubber squegee
Top coat	Denpox CBR	1.0 - 2.0	None	1.0 - 1.5	Rubber squegee and paintroller

Technical Data

Properties

Value

Fully cured at 20°C

7 days

Applied thickness

4,0 - 6.0 mm

Water Permeability

Nil – Karsten test (impermeable)

Hardness

SHORE D 80

Compressive strength

60 MPa

Reaction to fire

Bfl-s1

Bond strength

>1.5 MPa

Temperature resistance

Up to 70°C at 4 mm

Thermal expansion coefficient

< 38 ppm

Abrasion resistance

50 mg / 1000 cycles (Taber Abrader)

Thermal conductivity

< 0,6 W/m·K

Anti-slip according to DIN 51130

R9 – R13

Food Contact

No contamination

Colours

Yellow

Buff

Red

Sky Blue

Light Green

Light Grey

Mid Grey

White