Dencoat - Tomorrow's Floors Today

Systems

Dencrete HF

(9-12 mm)

Dencrete HF is a Heavy Duty cementitious polyurethane screed based on natural bio-polyol without solvents or any VOC. It provides superior resistance to aggressive chemicals, heavy impact and temperatures. It is dense and impervious and provides an anti slip surface suitable for dry and wet areas where a joint free finish and a robust long-lived floor is required.

Benefits

Resistant to Extreme Temperatures
Excellent Chemical Resistance
Clean & Hygienic
High Abrasion Resistance
No VOC & Pthalate Free
Anti Slip Finish Available

Applications

To provide a heavy duty floor finish with exceptional temperature and chemical resistance. Typical uses are wet and dry process areas with hot liquid spillage, hot water cleaning, heavy traffic, impact and chemical exposure.

Scope of use

Industrial kitchens
Loading areas
Dairies
Pharmaceuticals
Food & Beverage
Cold storage, Chiller & Freezer
Meat, Fish & Poultry processing
Chemical plant processing

Application conditions

Temperature 10ºC to 30ºC., best 15 to 25ºC., max. moisture content in the concrete subfloor 5% by weight.

Appearance

Dencrete HF is a coloured smooth floor with white fleck, which is exposed as the surface is trafficked.

Temperature Resistance

Dencrete HF is resistant to temperature cycles up to 130ºC wet heat. Extended periods at these temperatures and above will make material susceptible to chemical attack and abrasion wear.

Life Expectancy

15 - 25 years.

Colours

See separate color chart.

System Build-up

LAYER	PRODUCT	CONSUMPTION (kg/m²)	INTERMEDIATE	THICKNESS (mm)	APPLICATION
Primer	Dencrete Primer	0.3 - 0.5	Light sand scatter 0.3 - 0.8mm on wet surface	Min 0.3	Rubber squegee and paint roller
Top Layer	Dencrete HF	18.0 - 24.0	None	9.0 - 12.0	Screedbox, trowel board and spikeroller

Technical Data

Properties

Value

Fire class EN 13501-1

Bfl-s1

Fully cured at 20°C

3 days

Applied thickness

9 - 12 mm

Water Permeability

Nil – Karsten test (impermeable)

Hardness

SHORE D 90

Compressive strength

80 N/mm2

Bond strength

>1.5 MPa

Temperature resistance

Up to 130°C at 9 mm

Thermal expansion coefficient

< 25 ppm

Abrasion resistance

20 mg / 1000 cycles (Taber Abrader)

Thermal conductivity

< 1.5 W/m·K

Anti-slip according to DIN 51130

R9 – R13

Food Contact

No contamination

VOC according to EN 13419

Pass

Chemical resistance

See Dencrete resistance list

Flexural strenght

22 N/mm2

Tensile strenght

19 N/mm2

Colours

Yellow

Buff

Red

Sky Blue

Light Green

Light Grey

Mid Grey

Black