Dencoat - Tomorrow's Floors Today

Systems

Denspartic Topcoat

(0.5-1 mm)

Polyaspartic based flooring paint.
Denspartic Topcoat is ideal to provide a light to medium duty, easy to clean, chemical resistant floor coating. A non slip finish can be produced by incorporation of aggregates between coats. Typical uses are process, manufacturing, packaging and warehousing areas subjected to heavy foot and pallet truck traffic.

Benefits

Aesthetically Pleasing, Silkmat Surface
Very Good Chemical Resistance
Weatherproof & UV Resistant
Fast Installation
Curing Down to -30°C
Low Maintenance Cost
Non Slip Finish if required
Easy to Clean & Sterilize

Applications

Denspartic Topcoat offers light to medium wearability, impact and chemical resistance. Denspartic Topcoat is easy to clean and maintain in a hygienic condition. Typical areas of use are light trafficed surroundings subjected to heavy foot and pallet truck traffic. The very fast curing of Denspartic means, that an eventual production stop is minimized while installing the floor.

Scope of use

Manufacturing
Packaging
Warehouses

Application conditions

Temperature 5ºC to 30ºC, best 15 to 25ºC, max. moisture content in the concrete subfloor 5% by weight.

Appearance

Denspartic Topcoat is a smooth floor with a silkmatt finish.

Temperature Resistance

Denspartic Topcoat is resistant to temperature cycles up to 80ºC. Extended periods at these temperatures and above will make material susceptible to chemical attack and abrasion wear.

Life Expectancy

3 - 5 years.

Colours

See separate color chart.

System Build-up

LAYER	PRODUCT	CONSUMPTION (kg/m²)	INTERMEDIATE	THICKNESS (mm)	APPLICATION
Primer	Denspartic AP	0.3 - 0.5	sand scatter 0.3 - 0.8 or 0.7 - 1.2 for antislip properties	Min 0.3	Rubber squegee and paint roller
Top coat	Denspartic ACS	0.5 - 1.0	None	0.5 - 0.8	Rubber squegee and paint roller

Technical Data

Properties

Value

Abrasion resistance

50 mg / 1000 cycles (Taber Abrader)

Anti-slip according to DIN 51130

R9 – R13

Applied thickness

0,5 - 1 mm

Bond strength

>1.5 MPa

Compressive strength

40 MPa

Food Contact

No contamination

Fully cured at 20°C

2 hours

Hardness

SHORE D 40

Reaction to fire

Bfl-s1

Temperature resistance

Up to 80°C

Thermal conductivity

< 0,4 W/m·K

Thermal expansion coefficient

<40 ppm

Water Permeability

Nil – Karsten test (impermeable)

Colours

Yellow

Buff

Red

Sky Blue

Dark Green

Light Grey

Mid Grey

Black