Dencoat - Tomorrow's Floors Today

Systems

Denpox Structure

(6-15 mm)

A three pack, solvent free epoxy resin based flooring system. Denpox Structure 6-15 mm is ideal for areas, where decorative surfaces are wanted. The floor is very easy to maintain and easily cleanable and makes the working environments presentable. It is being recommended for usage in for instance exhibition rooms, show rooms, shopping rooms and corridor areas, etc.

Benefits

Many colors, patterns, logos, designs and drawings can be included
Low Maintenance Cost
Solvent Free; Low Odour
Attractive Appearance
Seamless & Clean Look

Applications

Decorative and wear resistant stone floors for receptions, exhibition areas, shops and show rooms. All kind of decorative effects are possible by varying the coloured and natural stone mix. Not recommended for areas exposed to heavy soiling and large physical load.

Scope of use

Exhibitions & Showrooms
Corridors
Shops & boutiques
wetzones around swimming pools

Application conditions

Temperature 10ºC to 30ºC, best 15 to 25ºC, max. moisture content in the concrete subfloor 5% by weight.

Appearance

Denpur Structure is a decorative floor build up with coloured or natural stones which may be varied as required.

Temperature Resistance

Denpur Structure is resistant to temperature cycles up to 70°C. Extended periods at these temperatures and above will make the material susceptible to chemical attack and abrasion wear.

Life Expectancy

10 - 20 years.

Colours

See separate color chart.

System Build-up

LAYER	PRODUCT	CONSUMPTION (kg/m²)	INTERMEDIATE	THICKNESS (mm)	APPLICATION
Primer	Denpox Primer	0.3 - 0.5	sand scatter	Min 0.3	Rubber squegee and paint roller
Wear layer	Denpox TCC + aggregate	3.0 - 4.0 + aggregate	Powerfloat to compact	6.0 - 15.0 depending on aggregate	Screedbox and trowel board

Technical Data

Properties

Value

Fully cured at 20°C

7 days

Applied thickness

6 - 15 mm

Water Permeability

N/A

Hardness

SHORE D 80

Compressive strength

40 MPa

Reaction to fire

Bfl-s1

Bond strength

>1.5 MPa

Temperature resistance

Up to 90°C at 15 mm

Thermal expansion coefficient

< 38 ppm

Abrasion resistance

50 mg / 1000 cycles (Taber Abrader)

Thermal conductivity

< 0,6 W/m·K

Anti-slip according to DIN 51130

R9 – R13

Food Contact

No contamination

Colours