Dencoat - Tomorrow's Floors Today

Systems

Dencryl Topfloor

(2-4 mm)

PMMA based flooring system.
Dencryl Topfloor with a smooth structure is ideal for areas, which are subject to heavy mechanical and chemical wear, with high demands for being free of dust, such as work rooms, storage rooms, laboratories, etc. Dencryl Topfloor is also suitable for renovation of older Dencryl floorings.

Benefits

Aesthetically Pleasing, Silkmat Surface
Very Good Chemical Resistance
Fast Installation
Curing Down to -30°C
Low Maintenance Cost
Non Slip Finish if required
UV Resistant
Easy to Clean & Sterilize

Applications

Dencryl Topfloor floorings are flexible with excellent wearability, impact and chemical resistance. Dencryl Topfloor is easy to clean and maintain in a hygienic condition. Typical areas of use are workshops, warehouses, exhibition areas, laboratories, canteens, bathroom facilities, offices and corridors. Dencryl Topfloor is used also to refresh or renovate old acrylic floors. The very fast curing of Dencryl floorings means, that an eventual production stop is minimized while installing the floor.

Scope of use

Work rooms
Storage rooms
Laboratories

Application conditions

Temperature -30ºC to 30ºC, best 15 to 25ºC, max. moisture content in the concrete subfloor 5% by weight.

Appearance

Dencryl Topfloor is a smooth floor with a silkmatt finish and is available in 4 versions: - Pigmented, for selection see Colour - Design look, see Colour Design - Mottled, see Colour Décor - Logo, individual company logo design

Temperature Resistance

Dencryl Topfloor is resistant to temperature cycles up to 80ºC. Extended periods at these temperatures and above will make material susceptible to chemical attack and abrasion wear.

Life Expectancy

10 - 15 years

Colours

See separate color chart.

System Build-up

LAYER	PRODUCT	CONSUMPTION (kg/m²)	INTERMEDIATE	THICKNESS (mm)	APPLICATION
Primer	Dencryl P11	0.3 - 0.5	sand scatter (optional)	Min 0.3	Rubber squegee and paintroller
Wear layer	Dencryl T1	2.5 - 3.0	None	2 - 4 mm	Notched rubber squeegee and spike roller
Top coat	Dencryl S32	0.3 - 0.5	None	min 0.5	Rubber squegee and paint roller

Technical Data

Properties

Value

Fully cured at 20°C

2 hours

Applied thickness

2 - 4 mm

Water Permeability

Nil – Karsten test (impermeable)

Hardness

SHORE D 40

Compressive strength

40 MPa

Reaction to fire

Dfl-s1

Bond strength

>1.5 MPa

Temperature resistance

Up to 80°C at 4 mm

Thermal expansion coefficient

<40 ppm

Abrasion resistance

50 mg / 1000 cycles (Taber Abrader)

Thermal conductivity

< 0,4 W/m·K

Anti-slip according to DIN 51130

R9 – R13

Food Contact

No contamination

Colours

Yellow

Buff

Red Page

Yellow Public

Navy Blue

Brown

Blue Page

Red

Blue

Sky Blue

Dark Green

Light Green

Dark Grey

Light Grey